In most licensed trades, the license belongs to a person, not the company. It does not go to the buyer when you sell. If you are that person, the buyer must have another licensed person in place by closing day. If not, the business cannot legally keep working. In Texas, the rules for HVAC and electrical licenses both say “a license is not transferable” [1] [6]. Buyers know this. A license held only by the owner can lower what they will pay. A free valuation shows the range. This guide shows how to protect it.

This guide is general information, not legal advice. State rules change, and every agency has its own forms and deadlines. Confirm your plan with the agency and your attorney. The Texas rules below were checked on November 15, 2026.

The general principle: who is the “qualifier”?

Licensed trades such as HVAC, plumbing and electrical work are usually regulated in two layers:

  1. An individual license, earned by experience and an exam. This person is often called the qualifier, master or license holder of record.
  2. A business license or registration. It may require the company to employ a qualifying person or be owned by one. It may also require insurance and the license number on trucks, ads and invoices.

When you sell, the second layer may move with the company. The first one stays with you. So the real question is not “does my license transfer?” but “who will be the qualifying individual for this company the day after closing?”

Question Why it matters
Is the license issued to me, the company, or both? Personal licenses never go with the sale
Is it an asset sale or a stock sale? In an asset sale the buyer’s new company usually needs its own business license
Can one licensee serve more than one company? Decides whether the buyer can use a licensee from another company it owns
How fast must a departed licensee be replaced? Sets your transition deadline
How is the buyer financing the deal? SBA rules limit how long you can stay

Texas example 1: HVAC (TDLR air conditioning and refrigeration)

The Texas Department of Licensing and Regulation (TDLR) licenses air conditioning and refrigeration contractors under Occupations Code Chapter 1302 and 16 Texas Administrative Code Chapter 75 [4].

  • Not transferable. “A license is not transferable” [1].
  • One company, full time. A licensee tied to a contracting company must assign the license to one company or permanent office. The licensee must “be an employee or owner” of that company and “work full time” there [2].
  • A licensee for every office. Each contracting company “must have a licensee employed full time for each permanent office” [3].
  • Notice deadlines. The company must notify TDLR within 30 calendar days when an assigned licensee “has left its employ” [3]. The licensee must also notify TDLR in writing within 30 calendar days of a change in assignment [2].
  • No lending the license. “A licensee may not allow another individual to use the licensee’s license for any purpose” [2]. And a company “may not use a license that is not assigned to that company” [3].
  • Trucks and paperwork. The affiliated licensee’s number must appear on both sides of every vehicle, in advertising and on proposals and invoices [3]. A new licensee means new lettering and new forms.

What this means for a seller: if your number is on the trucks, the buyer needs a new licensee who will be a full-time employee or owner. A handshake deal where you “keep your license on it” for a while after leaving does not fit these rules.

More on selling in this trade: sell an HVAC business and our guide on how to sell an HVAC business.

Texas example 2: plumbing (Texas State Board of Plumbing Examiners)

Plumbing in Texas is regulated by a separate agency, the Texas State Board of Plumbing Examiners (TSBPE), under 22 Texas Administrative Code Part 17. Its rules compilation is dated March 13, 2026 [7].

  • The Responsible Master Plumber. A plumbing company works under a Responsible Master Plumber (RMP): a licensed Master Plumber who “allows the person’s Master Plumber License to be used by only one plumbing company,” obtains permits, takes responsibility for the work and has filed proof of insurance [7].
  • One company at a time. “A Master Plumber may act as the RMP of record for only one person at a time” [7].
  • 10 business days. An RMP being removed or added must notify the board in writing “within ten (10) business days after the effective date of the change” [7].
  • Responsibility follows the license. The RMP of record is responsible for contracts secured and permits obtained under the license, even if someone else pulled the permit or signed the contract [7]. Agree in writing which jobs, permits and warranty calls are yours and which are the buyer’s.
  • Trucks and contracts. Both the RMP and the company owner must make sure the RMP’s license number is on both sides of every service vehicle, and the RMP’s name and number are on the first page of every proposal, invoice and contract [7].

The board’s rules also include a “Transfer of License” section (§365.23), which requires the recipient to meet the Plumbing License Law requirements and file a notarized Transfer of License Affidavit, with a $500 fee listed in the fee schedule [7]. Ask the board directly whether and how it applies to your situation before relying on it.

More on this trade: sell a plumbing business and how to sell a plumbing business.

Texas example 3: electrical (TDLR)

In Texas electrical work, the business itself holds an Electrical Contractor license, and it must employ a Master Electrician, who may also be the owner [5].

  • 30 business days. If the master leaves, the contractor must “designate a new Master Electrician of record within thirty business days from the date of separation” [5].

  • One contractor per master, unless the master electrician owns more than 50% of the electrical contracting business [5].

  • Not transferable, no lending. “A license is not transferable,” and using another person’s license, or letting someone use yours, can lead to denial, suspension, revocation or a penalty [6].

  • A sale means a new contractor license. TDLR’s FAQ says: “If the company is being sold or transferred to a different owner, the new company owner must apply for a new license” [9]. Plan that application into your closing timeline.

We list every Texas electrical rule we checked, with its source, on Texas electrical license rules when you sell. See also sell an electrical business.

The SBA wrinkle: you cannot stay on as the license holder

If your buyer uses an SBA 7(a) loan, the rules change again. Under SBA rules effective October 1, 2026, in a first-time acquisition “the seller… may not remain as an officer, director, stockholder, or employee of the business.” The business may only hire the seller as a consultant, for up to 24 months in total [8].

Put that next to the Texas HVAC rule that the licensee must be an employee or owner working full time [2]. In an SBA-financed sale, your license generally cannot be the one the business runs on after closing. The buyer’s licensee must be ready on day one. Lenders also check that transferable licenses conveyed in the purchase are secured as collateral [8], so expect questions about every license in your file.

Your options, from strongest to weakest

  1. A key employee already holds the license. Best case. Pair it with a stay bonus so that person stays through the sale.
  2. A key employee earns the license before you sell. Start early. Experience and exam requirements take time.
  3. The buyer holds the license, or already owns a company with a qualifier who is allowed to serve another company. Check the one-company rules above.
  4. The buyer hires a licensed manager before closing. Workable, but adds salary cost, which buyers subtract from earnings.
  5. You stay on for a defined period, only where the state rules and the buyer’s financing allow it, with a written end date and duties.

The weaker your option, the more risk the buyer is taking, and the more it will show up in price or terms.

A worked example (illustrative)

This plan is illustrative and describes no real company. A Texas HVAC owner, 61, holds the only contractor license in a 14-person company, and her number is on all nine trucks. Two years before selling, her lead technician starts on the contractor license requirements. He passes. When she lists the business, his license is already in the data room. The buyer, a first-time owner using an SBA loan, signs a letter of intent that names the technician as the licensee after closing, with a stay bonus. At closing, the company notifies TDLR, the trucks and invoices are updated with the new number, and she signs a six-month consulting agreement. The buyer never had to price in the risk of losing the license.

Checklist

  • List every license, registration and permit, and whose name each is in.
  • Read the current rules for each, and note the notice deadline.
  • Identify who will be the qualifying individual after closing.
  • Ask the agency how it treats an asset sale and a stock sale.
  • Budget for new truck lettering, forms, insurance certificates and ads.
  • Agree in the purchase agreement who handles open permits, warranties and callbacks.
  • Gather license copies with the rest of the documents buyers ask for.

Owner-held licenses are one of the risks the sale-readiness score checks. To see how buyers price your business today, get a free valuation, and use the net proceeds calculator to compare a sale now with a sale after the license handoff is in place.

Sources

Every figure and link was checked on .

  1. 16 Tex. Admin. Code § 75.22, Contractor Licensing Requirements: General (air conditioning and refrigeration). Legal Information Institute, Cornell Law School (Texas Administrative Code text)
  2. 16 Tex. Admin. Code § 75.70, Responsibilities of the Contractor/Licensee (amended effective September 1, 2024). Legal Information Institute, Cornell Law School (Texas Administrative Code text)
  3. 16 Tex. Admin. Code § 75.71, Responsibilities of the Contracting Company. Legal Information Institute, Cornell Law School (Texas Administrative Code text)
  4. Air Conditioning and Refrigeration Contractors: Laws and Rules. Texas Department of Licensing and Regulation
  5. Electrical Contractor License: How to Apply. Texas Department of Licensing and Regulation
  6. 16 Tex. Admin. Code § 73.22, Licensing Requirements: General (electricians). Legal Information Institute, Cornell Law School (Texas Administrative Code text)
  7. Administrative Rules, 22 Tex. Admin. Code Part 17 (March 13, 2026). Texas State Board of Plumbing Examiners
  8. SOP 50 10 8.1, Lender and Development Company Loan Programs, with technical updates (effective October 1, 2026). U.S. Small Business Administration
  9. Electricians: Frequently Asked Questions. Texas Department of Licensing and Regulation

Frequently asked questions

Can I transfer my contractor license to the buyer of my business?

Usually not. Most trade licenses are issued to an individual who passed an exam. In Texas, the rules for air conditioning contractors and for electricians both say a license is not transferable. The buyer needs their own licensed person in place.

Can I stay on as the license holder after I sell?

Sometimes, for a short, set period. That works if the buyer pays cash or uses a regular bank loan and the state rules allow it. The buyer may use an SBA 7(a) loan to buy the business. If so, rules in effect since October 1, 2026 bar the seller from staying as an employee or owner. In Texas HVAC, that clashes with the rule that the licensee be a full-time employee or owner.

How long does a Texas company have to replace its license holder?

It depends on the trade. A Texas electrical contractor must name a new master electrician within 30 business days after the old one leaves. An HVAC contracting company must notify TDLR within 30 calendar days when its licensee leaves. A Responsible Master Plumber must notify the plumbing board within 10 business days of being removed or added.

Does a stock sale avoid the license problem?

A stock sale means the buyer buys the company itself, not just its assets. It can help with licenses issued to the company, because the company stays the same. It does not solve a license held by you personally. If you leave, the company still needs a new qualified individual. Ask the licensing agency how it treats a change of ownership before you sign.

More in Prepare and protect · Glossary for owners · All guides