A valuation multiple is the number a buyer multiplies your earnings by to get a price. For small service businesses, earnings usually means seller discretionary earnings (SDE). That is your yearly profit plus what you pay yourself. Two free sources help most. BizBuySell, a site where owners list businesses for sale, publishes what businesses in several trades sold for. The Market Pulse survey, run by the International Business Brokers Association (IBBA) and M&A Source, covers all industries by deal size. In Q2 2026 it reported 2.0x SDE for deals under $500,000, 2.8x for $500,000 to $1 million and 3.1x for $1 million to $2 million [1]. To apply a multiple to your own numbers, run the free valuation.
Multiples by trade
BizBuySell’s trade pages look at businesses sold from 2021 to 2025. Each gives the middle half of sales. A quarter sold for less than the low figure, mostly smaller or weaker firms. A quarter sold for more, mostly larger and well-run ones. We found such figures for seven of the 12 trades we cover.
Full method, sample sizes and a CSV download: sale price data.
A few notes on the first seven rows. The samples are fair-sized: 562 HVAC listings, 226 plumbing, 266 electrical, 945 landscaping, 797 cleaning and 1,286 auto repair. The pest control page does not print a count. BizBuySell’s electrical group also holds mechanical contractors, so it is broader than electrical alone. Its cleaning group mixes commercial and residential firms.
The last five rows work differently. We found no published figure for roofing, garage doors, septic, pool service or restoration on its own. So we show our planning range and set it beside the closest BizBuySell group. Roofing and garage doors sit inside all building and construction businesses. Septic sits inside waste management and recycling, which BizBuySell says includes septic. Pool service sits inside all service businesses. Restoration is the odd one. Our 2.5x to 3.5x sits above the broad service group, so treat it as a planning figure. We will revisit it when restoration data appears.
Our multiples data, with sources, lists every figure above with its date and link.
Multiples by deal size, all industries
Here is what Market Pulse reported for the second quarter of 2026. Deals under $2 million are measured on SDE. Deals of $2 million to $50 million are measured on profit before loan interest, taxes and equipment write-downs (EBITDA) [1].
| Deal size (purchase price) | Earnings measure | Multiple, Q2 2026 |
|---|---|---|
| Under $500,000 | SDE | 2.0x |
| $500,000 to $1 million | SDE | 2.8x |
| $1 million to $2 million | SDE | 3.1x |
| $2 million to $5 million | EBITDA | 4.0x |
| $5 million to $50 million | EBITDA | 5.8x |
Source: Market Pulse Q2 2026 Highlights, IBBA and M&A Source [1].
The Q2 2026 survey ran July 1 to 15, 2026. It was completed by 255 business brokers and M&A advisors, who reported 181 closed transactions for the quarter [2]. The largest segment moved the most: the multiple reported for $5 million to $50 million deals rose from 5.5x to 5.8x, its highest since Q1 2022 [2].
The quarter before was steady. For Q1 2026, 300 advisors reported 203 sales. The survey found multiples “broadly consistent with prior periods.” It saw slight increases in the $500,000 to $1 million and $1 million to $2 million ranges [3].
BizBuySell, a marketplace that collects closed sales reported by brokers, said in its Q3 2026 Insight Report that market-wide average cash flow multiples rose 2.6% [4]. The press release gives the change but not the multiple itself.
What these numbers do not tell you
We want to be direct about the limits, because many websites are not.
- Market Pulse is all industries. It groups deals by size, not by trade. An HVAC company and a coffee shop of the same size land in the same row.
- Market Pulse comes from advisors. It surveys brokers and M&A advisors about deals they closed. It is not a census of every sale. Owners who sell on their own are not in it.
- Its segments are set by price, not earnings. A business lands in the “$1 million to $2 million” row because of what it sold for. That matters when you apply them (see the example below).
- BizBuySell data is voluntary. Closed transactions are reported to BizBuySell by brokers on a voluntary basis [4]. Its figures describe the deals brokers chose to report, and its trade pages work the same way.
- Trade groups are broad. A BizBuySell group can mix very different firms. Its businesses are also mostly small, owner-run ones. A larger company with a manager may sell above the range.
- Deeper trade data is behind paywalls. Appraisers use paid sales databases for close matches. Those figures are rarely published, and one trade in one state has few sales.
How to apply a multiple to your business
The figures below are illustrative. They describe no real company.
Say a plumbing company has $400,000 in SDE. A first guess using the 2.8x reported for $500,000 to $1 million deals gives $1,120,000. But that price puts the business in the $1 million to $2 million segment, where the reported multiple was 3.1x. That gives $1,240,000. Because the segments are set by price, check that the multiple you use matches the price it produces.
| Step | Figure |
|---|---|
| SDE (last full year) | $400,000 |
| Multiple for $500K to $1M deals, Q2 2026 | 2.8x → $1,120,000 |
| Multiple for $1M to $2M deals, Q2 2026 | 3.1x → $1,240,000 |
| Consistent segment | $1M to $2M |
| Starting estimate | about $1.24 million |
| Plumbing range, BizBuySell | $664,000 to $1,260,000 |
Now check it against the trade. BizBuySell’s plumbing range is 1.66x to 3.15x SDE [7]. On $400,000 of SDE, that gives $664,000 at the low end and $1,260,000 at the high end. The $1.24 million from the deal-size figures sits near the top of that range. That fits a plumbing firm of this size, since larger firms tend to sell in the top quarter.
That is a starting point, not a price. Next, ask whether the business is better or worse than a typical deal of its size. A company where the owner still runs every estimate should expect a lower multiple. One with a service manager, recurring maintenance revenue and documented add-backs can argue for more.
Our SDE calculator helps you get the earnings figure right first. A multiple applied to the wrong SDE gives the wrong price no matter how good the data is.
What moves a multiple up or down
A published range shows where most similar sales landed. Where you fall in it, or outside it, depends on how risky the buyer thinks your earnings are.
Usually raises the multiple:
- recurring revenue, such as maintenance plans or commercial contracts
- a manager or lead technician who runs daily work
- licenses held by staff who will stay
- three years of steady or rising SDE
- no customer above a small share of revenue
Usually lowers it:
- owner dependence, in sales, estimating or licensing
- one or two large customers
- add-backs you cannot document
- old trucks and equipment that need replacing
- declining revenue
Size matters too. The Q2 2026 Market Pulse multiples rise with deal size, from 2.0x SDE under $500,000 to 3.1x SDE for $1 million to $2 million [1]. The Q2 2026 release also noted that deals under $500,000 frequently receive just one or two offers, while 87% of deals over $5 million drew at least three [2]. More bidders tend to mean better prices.
Our guide on what lowers your business value covers each risk and what to do about it. The sale-readiness score shows which ones apply to you.
SDE multiples versus EBITDA multiples
The jump from 3.1x to 4.0x between the $1 million to $2 million and the $2 million to $5 million rows is not only about size. The earnings measure changes. SDE includes the full pay of one working owner. EBITDA assumes the business pays a manager. For the same company, EBITDA is lower, so the multiple on it is higher.
If you compare your SDE with an EBITDA multiple, you will overstate your value. Our guide to SDE and add-backs shows how to convert one to the other.
The headline multiple versus the cash you receive
A multiple describes the total price. It does not tell you when you get paid. Two offers at the same multiple can be worth very different amounts to you.
In Q2 2026, sellers received 83% to 92% of deal value as cash at close on average, depending on deal size. Seller financing accounted for less than 10% of most deals, “somewhat below trend” [2]. The rest came as seller notes, earnouts or retained equity.
The figures below are illustrative. Compare two offers for the same business with $400,000 in SDE:
| Offer | Multiple | Total price | Cash at close | Paid later |
|---|---|---|---|---|
| A | 3.0x | $1,200,000 | $1,080,000 | $120,000 seller note over 5 years |
| B | 3.3x | $1,320,000 | $924,000 | $396,000 earnout tied to revenue targets |
Offer B has the higher multiple. Offer A puts $156,000 more in your hands on closing day, and less of the price depends on how the business performs after you leave. Read seller financing and earnouts before you compare offers on multiple alone.
What the market looked like in late 2026
Multiples sit inside a market. BizBuySell’s Q3 2026 Insight Report, released October 20, 2026, counted 2,132 businesses sold in the quarter, essentially flat from Q2 and down 7% from a year earlier. The median sale price was $350,000, up 17% from a year earlier. Buyer confidence fell to 49 and seller confidence to 47 on BizBuySell’s index [4].
Fewer deals with higher prices can mean buyers are concentrating on stronger businesses. It does not mean every business is worth more. Use the most recent dated figures, and check them again when you go to market.
Why not use a revenue multiple?
Some owners hear that businesses in their trade sell for “one times revenue” or a similar rule. Revenue multiples ignore margins. Two companies with the same revenue can have very different SDE, and a buyer pays for SDE. Use a revenue multiple only as a cross-check after you have priced the business on earnings.
The lender’s check on the multiple
Even a buyer who agrees with your multiple may not be able to pay it. If the buyer uses an SBA 7(a) loan, the lender needs a business valuation, and for a price above $350,000 it must come from an accredited, independent appraiser working for the lender. Under the rules effective October 1, 2026, if the price exceeds that valuation, the buyer must cover the difference with equity [5]. A multiple far above what comparable data supports tends to get pulled back to earth at this step.
Where to go next
- Compare trades side by side on the valuation multiples page.
- Get a range for your own business with the free valuation.
- Read the trade detail for HVAC business valuation or visit the trade page for selling a plumbing business.
- If you are close to selling, read how to sell a service business.