Electrical · California · License rules
Does my electrical license transfer when I sell my business in California?
The short answer
No. Your California C-10 electrical license cannot be transferred to a buyer. It belongs to the business entity, even if the same qualifier stays on. The qualifier is the licensed person the company works under. An asset buyer needs their own C-10 license. When the qualifier leaves, CSLB must get written notice within 90 days.
The rule at a glance
License check · CAChecked
C-10 Electrical Contractor license
- Who holds it
- The company
- Needs a licensed person on staff
- Yes
- Passes to the buyer
- No
Deadline to watch90 days
If CSLB does not hear within 90 days that the qualifier left, the license is suspended or the class removed. This starts when CSLB gets the notice.
Last checked
Who to call
Contractors State License Board (CSLB)
Have your license number ready. Ask the questions in the list below, and get the answers in writing.
Your checklist
Steps for selling a California electrical company
5 steps, in order. The small numbers link to the rule behind each one.
Before you list the business
Confirm which business holds the C-10 license. If you plan to form a new company for the sale, know that a new entity needs a new license.[1]
Before you sign a letter of intent
Tell the buyer early that the C-10 license number does not come with an asset purchase. Then they can start their own application.[1]
Before closing
If you are a general partnership, plan for the license to end when a general partner leaves.[1]
Within 90 days after you leave
If you are the electrical qualifier and will step away, send CSLB written notice within 90 days. The company has 90 days to name a new qualifier.[3]
The buyer
What the buyer must do
- Get an original C-10 license from CSLB in the buyer's own business name before doing electrical contracting.[1]
- Name a C-10 qualifier who will supervise the electrical work. That person can qualify no more than three firms in a one-year period.[2][3]
- Post the $25,000 contractor's bond and file workers' comp proof or an exemption.[3]
Price and timing
How this changes your sale
In California the company keeps working only while a licensed person stands behind it. If that person is you, a buyer will lower the price or ask you to stay until a new one is in place.
Plan the handoff around the 90 days in the CSLB rules. Name the new license holder before you sign, not after you close.
4 questions are still open below. Get the CSLB answer in writing before the buyer makes a written offer, so it does not slow the closing.
The rules
What the rules say
Each line is our plain reading of one rule. Open it to see the exact words.
Can it be transferred?
A CSLB license, including a C-10 license, belongs to the business entity. It cannot be moved from one business to another, even with the same qualifier.
“licenses are not transferable from one business to another, even if the qualifying individual is the same for both”Source 1: CSLB: Change in Business Entity
If someone buys your licensed company, the license number does not pass to the buyer's company. The law lists a few narrow exceptions, such as some mergers or family businesses.
“If a company or individual buys an existing licensed contracting company, the license number cannot be transferred to the new company unless one of the above requirements is met.”Source 1: CSLB: Change in Business Entity
When the owners change
If you are a sole owner (one person, not a company), your license number cannot be part of the sale. The buyer must get their own license first.
“If a sole owner sells the business to another individual, the sole owner license number is not transferable and cannot be included in the sale of the business.”Source 2: CSLB: Change in Personnel
A new license is needed when the type of business changes, for example from sole owner to corporation.
“A new license is required whenever the business entity changes (such as sole owner to corporation, sole owner to partnership, partnership to corporation, etc.)”Source 1: CSLB: Change in Business Entity
A corporate license is tied to the corporation's Secretary of State number. If that number changes, the corporation needs a new license number.
“A corporate license number is issued exclusively to a specific corporate registration number assigned by the Secretary of State's Office. If this registration number changes, a new contractor license number will be required for the new corporation.”Source 1: CSLB: Change in Business Entity
Officers on a corporate license can be changed. Adding or removing an officer who is not the qualifier does not change the license status.
“Corporate officers can be changed on a corporate license. Adding or removing a corporate officer (non-qualifier) does not affect the status of the license.”Source 2: CSLB: Change in Personnel
New officers added to a corporate license must meet fingerprinting rules before CSLB approves them.
“All new officers will be required to comply with fingerprinting requirements before the application can be approved.”Source 2: CSLB: Change in Personnel
If your company is a general partnership and a general partner leaves, the partnership license must be canceled.
“If a general partner leaves the partnership, the partnership license must be canceled.”Source 1: CSLB: Change in Business Entity
Partners cannot be added to or removed from a general partnership license. A new partnership needs a new license.
“Partners cannot be added to or deleted from a general partnership license. A new license would be required for the new partnership structure.”Source 1: CSLB: Change in Business Entity
The licensed person the company works under
The qualifier (the licensed person the company works under) must supervise and control the company's construction work.
“shall be responsible for exercising supervision and control of their employer’s or principal’s construction operations”Source 3: Cal. Bus. & Prof. Code § 7068.1
A qualifier who is an employee (RME, responsible managing employee) must work 32 hours a week. If the business is open less, 80% of its hours is enough.
““Actively engaged” means working 32 hours per week, or 80 percent of the total hours per week that the applicant’s business is in operation, whichever is less.”Source 3: Cal. Bus. & Prof. Code § 7068.1
One person may qualify more than one company only in limited cases. It is never more than three companies in a one-year period.
“The individual may qualify no more than three firms in any one-year period”Source 2: CSLB: Change in Personnel
The company has 90 days after the qualifier leaves to replace them. If not, the license is suspended or the class is removed.
“The licensee shall have 90 days after the date of disassociation in which to replace the qualifier.”Source 3: Cal. Bus. & Prof. Code § 7068.1
CSLB may grant one 90-day extension to replace the qualifier. It needs good cause in listed cases, such as a disputed date, a death, or a processing delay.
“may review and accept a petition for one 90-day extension to replace the qualifier”Source 3: Cal. Bus. & Prof. Code § 7068.1
The departing qualifier stays responsible for the company's work until the disassociation date on CSLB's records.
“Be advised that the RME or RMO remains responsible for all work performed by the company prior to their recorded disassociation date.”Source 2: CSLB: Change in Personnel
Deadlines to tell the agency
If CSLB does not hear within 90 days that the qualifier left, the license is suspended or the class removed. This starts when CSLB gets the notice.
“Failure to notify CSLB within 90 days of the disassociation date will result in the automatic suspension of the license or removal of the classification, effective the date written notification is received by CSLB.”Source 2: CSLB: Change in Personnel
If the qualifier leaves, the company or the qualifier must tell CSLB in writing within 90 days.
“the licensee or the qualifier shall notify the registrar in writing within 90 days after the date of disassociation”Source 3: Cal. Bus. & Prof. Code § 7068.1
You must tell CSLB about any change to your license within 90 days of the change.
“You must notify CSLB of any change to your license within 90 days of the change (Business and Professions Code section 7083).”Source 1: CSLB: Change in Business Entity
What the buyer applies for
When a new license is needed, the new business applies for an original license and pays all fees. It also posts new bonds and files workers' comp proof or an exemption.
“you must complete and submit an Application for Original Contractor License or an Application for Original Contractor License (Exam Waived). You will be required to pay all fees, post new bond(s), and provide proof of workers' compensation insurance”Source 1: CSLB: Change in Business Entity
Insurance and bonds
Every active license must keep a $25,000 contractor's bond on file.
“file or have on file a contractor’s bond in the sum of twenty-five thousand dollars ($25,000).”Source 3: Cal. Bus. & Prof. Code § 7068.1
A qualifier who is not the owner or a general partner must also file a separate $25,000 qualifying individual's bond.
“is neither the proprietor, a general partner, nor a joint licensee, the qualifying individual shall file or have on file a”Source 3: Cal. Bus. & Prof. Code § 7068.1
A corporate qualifier who owns 10% or more of the voting stock does not need the qualifier bond. If a sale drops their share below 10%, that exemption ends.
“The responsible managing officer of a corporation shall not be required to file or have on file a qualifying individual’s bond, if the responsible managing officer owns 10 percent or more of the voting stock of the corporation”Source 3: Cal. Bus. & Prof. Code § 7068.1
The workers' comp certificate on file must be in the license holder's business name.
“have on file at all times a current and valid Certificate of Workers’ Compensation Insurance or Certification of Self-Insurance in the applicant’s or licensee’s business name.”Source 3: Cal. Bus. & Prof. Code § 7068.1
Not settled
Ask the CSLB
The rules we read do not answer these. We will not guess.
- Whether a stock sale of your electrical corporation or LLC keeps the C-10 license, with only officer and qualifier changes filed.
- Whether selling only your electrical equipment, customers and name to a licensed buyer needs more than the buyer's own C-10 license.
- How long CSLB now takes to process a C-10 original license and a qualifier replacement. The buyer must be ready at closing.
- Whether any of the license reassignment options in Business and Professions Code section 7075.1(c) fits your deal.
Electrical owners in California ask
My C-10 qualifier is staying with the company after the sale. Does that let the license move to the buyer's company?
No. CSLB says licenses are not transferable from one business to another, even when the qualifying person is the same for both.
We are a corporation. Do new owners who become officers need to be approved?
New officers are added by application to CSLB. They must meet fingerprinting rules before approval. Removing an officer who is not the qualifier does not change the license status.
Will I still be responsible for electrical jobs after I leave as qualifier?
Yes, until your recorded leaving date. If notice is late, CSLB records that date as the day it receives the notice, so file on time.
Sources
Where these rules come from
- CSLB: Change in Business EntityContractors State License Board
- CSLB: Change in PersonnelContractors State License Board
- Cal. Bus. & Prof. Code § 7068.1Contractors State License Board (2026 Contractors License Law & Reference Book)
Last checked . This page is general information, not legal advice. Rules change, so confirm your plan with the CSLB before you sign.
Find out what buyers would pay, in private.
Two numbers to start. No account. Your name stays private.
You pay nothing to sell with us. The buyer pays our fee, and we put that in writing.